Getting the right pump for your lotion is essential for a good experience. Shower lotion pumps for high-quality materials that are globally compliant for safety and sustainable use. Look for pump designs with a locking mechanism to avoid leaks when traveling or when the pump is stored away. Make sure the pump neck fits the body lotion container and is closed off properly to avoid spill overs. If you want to have more flexibility over the amount of lotion you dispense, look for pumps with a dial or cap that sets the desired amount of lotion to be dispensed.
The pump needs to be clean and dry, so make sure to wash and dry your container before attaching the pump system. If you are in the process of refilling a container, be sure to clean the neck of the bottle from any lotion residue that may have built up from previous uses. Make sure your container is a compatible material too; most Lotion pumps work with soft plastics or are Pyrex. To avoid inconsistent pumping, make sure you have enough lotion in the container to account for the used lotion. It is also advised to keep a little breathing room from the cover to avoid over pressure within the bottle.
If this is your first time using the pump or it has been refilled, it is important to prime it first. Start by removing the pump's protective cap. Then unlock the mechanism by twisting it clockwise or counterclockwise until it clicks. Once all that is done press the pump head down but make sure to press it down firmly, but not too hard or it will break. Continue to press the head down until the pump starts to dispense lotion. This process will eliminate all of the air from the pump, so that it works smoothly. If the pump and it getting lotion is taking too long, make sure that the tube is fully submerged in the lotion.
After priming, the pump works just like any other lotion pump. Point the pump directly over your hand or the area of your body you want to put the lotion onto. Make sure to press the pump head down gently or it will dispense too much at once. It is recommended to put lotion on in smaller amounts since it is easier to add more lotion if needed than it is to take lotion off. Pumps are also preset to dispense a certain amount of lotion to reduce the amount of waste. If you are using it on a body area that can be hard to reach or is very big like your back, pour the lotion onto a towel before attempting to use it. Pumps also spit out lotion after being pressed down so make sure to release it gently and to not let the lotion sit in the pump.
Wiping the pump head after every use will help avoid build-up and improve the function of the pump. About every 2 weeks, if possible, detach the parts and give them a rinse in warm water. Wait until all parts have dried before putting everything back together. Make sure to lock the pump head when traveling or when the pump will not be used for a long time to prevent lotion from accidentally dispensing. To avoid damage to the pump and to the lotion, store in a cool dry place away from sunlight.
If the pump head or dispensary system has trouble working when the pump has been used correctly a few times, these are head or system errors, not user errors. If the pump if the pump that lotion dispenses unevenly, the issue may be as simple as the container being tipped over or the tube being bent in a way that creates a kink in the line. If the pump will not function at all, the lotion itself may have become too thick over time and warming the container slightly may help. If the pump has gotten clogged, place the tube under warm water and use a toothpick to gently clear the opening if it becomes stubborn. If it is leaking, it may just not be locked properly or the tube may have dry or damaged parts that need to be replaced.
There are a few ways to show eco conscientiousness while using lotion pumps. Be sure to select pumps made of recycled or recyclable materials that comply with the global green standards. Reduce plastic waste by refilling your container rather than purchasing a new one. Separate the components of the pumps you dispose of to facilitate proper recycling when possible. Choose pumps from brands that are known to be conscientious with their sustainability during the manufacturing processes. These practices allow you to use a lotion pump while limiting your eco footprint.
EN