Getting a new foam pump is a great addition to your routines whether it is in your skincare or cleaning, you get a mess-free pump every time you need to use it! But facing the situation with the annoying and unnecessary bubbles every time you refill it is a frustrating situation that shouldn't have to happen. Knowing the ways to refill your pump without bubbles is an important skill to have. Not only will you save product with no bubbles, you will extend the life of your foam pump. Here are some valuable tips to perforom seamless refills without bubbles every time!
Be Mindful of How Thick or Thin the Liquid is that you are Refilling The Foam Pump Bottle With
The type of product is the main factor in whether or not bubbles will be created. Foam pumps use a certain type of liquid that is specific to that pump so keeping an eye on that is an important detail. If you use a liquid that is too thin, the foam pump will be able to push all the liquid out and an excess of bubbles will be created. If the liquid is too thick, the foam pump will get clogged. If you want to avoid bubbles during the refill, make sure you use a liquid with a velosity. Foam pumps, like the BEYAQI Foam Pump, have a velosity that allows a liquid to flow in and out multiple times with no risk of clogging!
When you pour liquid quickly, you can create bubbles, and rushing through filling a bottle increases the likelihood of this happening. Instead of being in a rush, you should use a funnel that can direct the liquid along the wall of the bottle. Pour the liquid in at a gentle angle rather than dumping it in quickly. Tilting the bottle can also help reduce the amount of air being splashed around, which assists in making the liquid pour in a calmer way rather than creating a lot of foam.
A bottle that is dirty, or that has residue from a previously used liquid, can create a lot of problems during the filling process. It is best to rinse the bottle out with warm water a few times and let it dry before you go to fill it. For the funnel and other filling tools, you should also ensure these things are cleaned out as well. When liquid pours into a bottle that has a clean filling surface, it can help to keep the quality of the liquid intact.
Agitating the liquid is a guaranteed way to create foam. When the liquid is agitated, air is mixed into the liquid where it will become foam as the pump is used. Always set the bottle aligned and stable. When avanting the liquid, do it slowly, and try to disturb the contents as little as possible. This will help ensure the liquid is as intact and to limit the trapping of air in the foam.
Even if they're pouring slowly, air is guaranteed to be trapped in the bottle. To let air escape, leave space where the liquid is and the pump head. From here, screw the pump in a little bit, and press it a few times gently. Once you do this, tighten the pump in fully. This helps to ensure the pump has a bubble, not to mention, will be very self. This is very important right after the bottle has been filled.
If you are going to remove or attach the pump head, be careful to not twist or yank on the pump. It is a precision piece of equipment, and overt pulling, twisting or rough handling may damage the seals or misalign the parts, which will cause air to leak, and bubbles to form. A good quality pump will have a locking mechanism and strong seals. It is important to follow manufacturer’s instructions to not damage these parts.
A valuable skill that improves the usability and sustainability of a product is the ability to refill a foam pump bottle without bubbles. These tips will give great satisfaction and value as well as a mess free refill and a reduction of product waste. There is great value in these tips for not only personal use, but professional as well. It meets the demand for a streamlined, very user friendly product that is also eco-conscious.
EN